The vacuum tank is a cylinder sealed with an oval head at both ends and is connected with a slurry suction pipe, a slurry discharge pipe and an exhaust pipe. The suction pipe is located below the tank. The outlet pipe is located on the side of the tank. The exhaust pipe is located at the top of the tank and is connected to the water ring vacuum pump.

After the vacuum pump works, negative pressure can be formed in the vacuum tank. Under the action of atmospheric pressure, the mud enters the holl

Product Detail

I. Performance Parameters：

Model	ZCQ240-40	ZCQ270-48	ZCQ300-90	ZCQ360-180
Main diameter	700mm	800mm	900mm	1000mm
Capacity	≤240m³/h	≤270m³/h	≤300m³/h	≤360m³/h
Vacuum	0.020~0.045Mpa	0.030~0.050Mpa	0.035~0.055Mpa	0.040~0.065Mpa
Ratio	1.67	1.68	1.68	1.72
Efficiency	≥95%	≥95%	≥95%	≥95%
Motor power	15Kw	22Kw	30Kw	37Kw
Vacuum Power	3Kw	4Kw	4Kw	5.5Kw
Rotary speed	876 r/min	880 r/min	876 r/min	880 r/min
Dimension	1790x1100x1550mm	2000x1000x1670mm	2210x1120x1550mm	2400x1500x1850mm
Weight	1210kg	1350kg	1650kg	1800kg

II. Product Introduction

ZCQ series drilling fluid vacuum degasser (also known as negative pressure degasser) produced by Xi 'an Hongding Energy Technology Co., LTD. (referred to as HONDIN) is a new special equipment for the treatment of gas-immersed drilling fluid developed by the company on the basis of various types of degasser at home and abroad. It is suitable for all kinds of mud purification system, which plays a very important role in restoring the specific gravity of mud, stabilizing the viscosity of mud and reducing the drilling cost. In the case of no air immersion of mud, it can also be used as a high-power agitator.

ZCQ series degasser belongs to the vacuum drilling fluid degasser, that is, the suction effect of vacuum pump is used to create a negative pressure zone in the vacuum tank. Under the action of atmospheric pressure, mud enters the hollow shaft of the rotor through the suction pipe, and then sprays into the wall of the tank through the window around the hollow shaft. Due to the impact and the action of the separation wheel, the drilling fluid is separated into thin layers. The bubbles immersed in the mud are broken, the gas escapes, and through the suction of the vacuum pump and the separation of the gas-water separator, the gas is discharged to the safety area by the exhaust pipe of the drilling fluid separator, and the mud is discharged out of the tank by the impeller. Since the main motor starts first, the impeller connected with the motor is in a high-speed rotation state, so the mud can only enter the tank from the suction pipe, and will not be sucked from the drain pipe.

III. Structural Features:

1, the use of vacuum pump pumping mud into the vacuum tank, and use it to make the gas is pumped out of the vacuum tank, the vacuum pump here plays two different roles.

2, water ring vacuum pump in the working process, always in an isothermal state, suitable for flammable and explosive gas suction, reliable safety performance.

3, the mud through the rotor window high-speed shooting to the four walls, the bubbles in the mud broken thoroughly, good degassing effect.

4. The main motor is offset and the center of gravity of the whole machine is reduced.

5, the use of belt drive to avoid the complexity of the deceleration mechanism.

6, the application of gas-water separator will not cause water and gas to be discharged at the same time, so that the exhaust pipe is always smooth. At the same time, it can also be circulated to the vacuum pump water supply, saving water.

7, the suction pipe is inserted into the mud tank, in the case of no air immersion in the mud, the drilling fluid vacuum degasser can be used as a high-power agitator.

IV. Operating Principle:

After the vacuum pump works, negative pressure can be formed in the vacuum tank. Under the action of atmospheric pressure, the mud enters the hollow shaft of the rotor through the suction tube, and then jets into the wall of the tank by the window around the hollow shaft, so as to realize the separation of gas and liquid.

Previous : Desander Next : Decanter centrifuge